pm6 w/ ul frame psp mode

[himself68]

my psp mode will not work for anything... i will turn it on and put a ball in and it will go full auto... same w/ eyes off it just goes full auto... i turned up the sensitivity to 15 and it does the same thing... what can this be

[SuPeRmAn]

maybe debounce?idk

[himself68]

I am not sure but I do not think the ul frame comes w/ debounce... If it does i havent set it off factory... i just did this when Christian shot it

[alexmason123]

new battery

[DM5KILLA]

go to pbnation ( if u dont have the manual ) and achet the dye forum for the manual and make sure all of your settings are correct also new batterey is a good suggestion

[DM5GUNNA]

wat mason said. And every UL frame has debounce, but that would not affect PSP.

[himself68]

how do u set the debounce... have the manuel but it says nothing of debounce

[jojo750]

how do u set the debounce... have the manuel but it says nothing of debounce

set your trigger sensitivity higher. if it is too low, will cause full auto.

i found this in the manual. GREEN is the color light you will need to change.

see if this fixes it.

[himself68]

that was the first thing i tried... i had it on 1 and then set it to 15 (5 is factory default) i changed the battery and that didnt work either... it worked when i first got it so could it be the dwell

[jojo750]

that was the first thing i tried... i had it on 1 and then set it to 15 (5 is factory default) i changed the battery and that didnt work either... it worked when i first got it so could it be the dwell

dwell shouldnt make it go full auto. if anything, too low a dwell and the bolt wont cycle. but you can check it.
have you just tried adjusting your trigger a little. is the spring still in the trigger? or did you take it out? that would cause a little bounce.

[himself68]

its still in and i check the trigger... i might just send it to dye

[DM5KILLA]

yah, can we pleeeeeez get back on topic now idk try calling dye just to hear their input (858) 536-5183

[Junkie]

I'm getting real tired of cleaning these threads up. If you don't have any help to provide the creator of the thread, I suggest you don't post.