View Full Version : pm6 psp mode
himself68
06-23-2007, 03:09 PM
my pm6 w/ a ul frame and the psp is not working... i can get the first 3 shots, but then after that it goes full auto... the solenoid keeps clicking but i am not pulling the trigger... i set every setting back to factory and its still acting this way... i think casey might no how to fix it if he would be so kind... but any ideas?
jojo750
06-23-2007, 04:49 PM
back out your trigger.
check to see what your trigger sensitivity is set at, then go higher.
just a couple of options.
dont remember is there is a debounce setting on the ul frame. if so, go higher.
DirtyD123
06-23-2007, 06:18 PM
thats a good place to start also make sure you dont have any crud in there by the trigger which could be making it stick old paint will do that, if you dont have a spring in it it might make it do the as well...just other ideas...but jojo's probably right
RecBallKing!
06-23-2007, 07:24 PM
always start by changing the battery. 9/10 times its the battery.
himself68
06-23-2007, 08:03 PM
i have changed the batteries more then a few times so its not that for sure... all the settings are on factory defaults and i have messed around w/ the trigger and thats not it... i have been stumped by this one and i dont even know where to start
RecBallKing!
06-23-2007, 08:22 PM
bring it by the store 2morrow(sunday). brad is working and if he cant figure it out ill take a look.
himself68
06-23-2007, 08:38 PM
i cant get up there sunday b/c i work all day but ill prolly drop by sometime during the week
DeepFreeze
06-23-2007, 08:48 PM
I know Brad will be out of town during the middle of the week. I am not certain of his schedule, but I know for sure he will be gone Wednesday and Thursday.
himself68
06-23-2007, 08:50 PM
ill prolly head up monday depending on my work schedual
What does it do when it's NOT in PSP mode?
guitarmaster1195
06-27-2007, 01:22 PM
Turn debounce up to 5 first. Are there trigger delay/activation settings in the UL frame?
5 IS the stock debounce setting. There is no CFP or other filtering software in the UL frame.
Leave everything programmed to the stock settings until we can eliminate some variables.
So, what does it shoot like when in Semi and also, how does it act when you shoot it without air?
jojo750
06-27-2007, 10:25 PM
does it have the trigger spring in?
himself68
06-28-2007, 12:12 AM
i took it up today and brad affirmed my original thoughts that there was a software malfunction and it will be visting dye headquarters in cali pretty soon