PDA

View Full Version : Tank For An Impulse

Doginc
04-17-2006, 01:01 AM
whats a good n2 tank for a impulse?
mike_g
04-17-2006, 09:52 AM
anything, probably HP. i would go with a crossfire though.
guitarmaster1195
04-17-2006, 10:02 AM
my friend uses a 68/45 pmi hp on his, and it works good with a unimount but not a drop
PBMainiac3
04-17-2006, 02:27 PM
i got a 45/45, blew the solenoid. BE CAREFUL--HAVE PRESSURE TURNED WAAY DOWN BEFORE SCREWING IN TANK, but otherwise, i have had no problems with the 45/45
Doginc
04-17-2006, 09:36 PM
can you be more specific? here are my options:

http://img230.imageshack.us/img230/5189/untitled1mi.png

im thinking a PMI, as EVILs are way expensive. :S
mike_g
04-17-2006, 09:37 PM
the last one
PBMainiac3
04-17-2006, 10:42 PM
amen.
guitarmaster1195
04-18-2006, 05:25 PM
yep.
bambuski
04-21-2006, 10:56 AM
guitarmaster1195, PBMainiac3. Thanks for your useless comments. You really do not need to respond to every post.


Doginc, any HP nitro tank will work fine on you impulse. .
Rapchizzle
04-21-2006, 11:14 AM
if you would be willing to spend a few extra dollars, you can get an adjustable tank. you can set the output of the tank to what ever you want, not just HP or LP.

a really good quality tank for a good price would be a Nitro Duck X-stream screw-in tank. they screw in lik ethe other preset tanks but are fully adjustable. I've owned three and have never been dissatisfied.

the only problem i have ever encountered is a slight climb in pressure. but this was only with the most recent tank i'm using, which is abotu 5 years old. and it still works beautifully.