View Full Version : Cocker Hosing Setup
DM5GUNNA
09-17-2005, 05:03 PM
I have a cocker with a Belsales Hollowpoint 3-Way and a CCM Slider frame. It should be the Left barb w/ left ram barb, middle to LPR, and Right to Right LPR barb (the front) right???? If not please correct me.
Well if your gun works then yes...and if it doesn't and it works backwards, then our hoses are backwards, it depends on if the Besales 3 way has 3 orings im not sure if it does, and it you have a hinge or slide trigger...
DeepFreeze
09-17-2005, 08:22 PM
To elaborate on Koz's post.
If you have a slide trigger with a two o-ring 3-way the front 3-way hose goes to the rear of the ram and the rear hose to the front of the ram.
If you have a slide trigger with a three o-ring 3-way the front 3-way hose goes to the front of the ram and the rear hose goes to the rear of the ram.
If you have a hinge trigger with a two o-ring 3-way the front 3-way hose goes to the front of the ram and the rear hose to the rear of the ram.
If you have a hinge trigger with a three o-ring 3-way the front 3-way hose goes to the rear of the ram and the rear hose goes to the front of the ram.
No matter what setup you have the middle barb always goes to the LPR.
***Note*** I am still looking for barbs on the left and right side of my three way, as well as multiple barbs on my LPR.......lmao
DM5GUNNA
09-17-2005, 08:39 PM
thanks deep...always there to help when it comes to cockers huh??? Oh ya what about that Cocker and mag tech class that was being thought of?
See I would've posted all that...but I don't know about his 3-way, and I hate typing all that out...typing up 2 options I can to but all 10...no thanks