View Full Version : phantom
snake
09-30-2005, 12:35 PM
what kind of screw needs to in the bolt to replace the nylon screw would it be the size off the phantom web site
The size off of the phantom website would make a lot of sense...in fact if you don't believe that I can't tell you who do believe, and if you want to be sure, just take the bolt to the local hardware store with you and check it...
Paintballindave
10-01-2005, 01:07 PM
I know if you go to any ace hardware they have both the nylon and a steel version. I'm not 100% sure as to what the size of the screw is but, I'm pretty sure the website tells you. Just go in and show them the old nylon one if you still have it and they will be able to lead you in the right direction. Hope this helps Sam.
snake
10-03-2005, 05:48 PM
I put the 10/32 in the bolt but the vulacity was still jumping around at the field last weekend so what i did was i put a little teflon tape around the threds and now the vulacity is not jumping around as much any more its just fluxuating 5 to 7 fps
Paintballindave
10-05-2005, 12:57 AM
another thing that I have tryed which helps with velocity fluctuations when you use CO2 is to wrap a tiny amount of tef tape around the Tuned Port Compensator, ( the screw inside of the bolt which you turn to adjust the velocity).
snake
10-05-2005, 04:11 PM
I put tef tape around the screw last week and it look likes its helps so far
Paintballindave
10-05-2005, 04:50 PM
Well let me know how things go with that, I should be able to start making it out to the field again soon snd playing with you guys cuz I'm getting a new job at an engineering firm and quitting out at the country club, as much as I don't want too.
snake
10-05-2005, 09:14 PM
thats good