bkomasta
10-02-2006, 05:13 PM
COPIED AND PASTED FROM MY PBN B/S/T
http://www.pbnation.com/showthread.php?t=1749465
http://img112.imageshack.us/img112/9250/pmgwc6ik4bb.jpg
I doubt ill let this go just for anything, just seeing what offers i can get. Ive done mods to the ram, added o-ring for smoother operation and better sound. (sounds like a matrix/spool) no more clank metal to metal sound, sounds like rubber hitting. I also put a lightened valve spring and ram spring. Trade value is more than sale value, this is LE. The current Fusions out are only Silver and Black colors and do not have the RAPS, i have the LE Armour Gray
I WILL REPEAT, THIS COLOR IS NOT MADE ANYMORE, ONLY ABOUT 30 IS MADE WITH THIS COLOR PROBABLY EVEN LESS SINCE THE FIRST PRODUCTION WERE 100 OF THEM. The newer production will only have DUST BLACK AND SILVER. ALSO wont have the RAPS. So this is WORTH ALOT MORE than the production ones. There ARE LESS than 30 in the WORLD.
Color: Armour Gray (LE color)
Features:
* Electronic LED switch
* Semi / Ramping
* 9V Battery
* N2 / Compressed air
* 250 pis low pressure air-ram
* Quick-release bolt
* Over-length 19.7-inch
* Autococker 14-inch two-piece barrel
* Weight 2.5 pounds
* Infrared rays sensor strike
* Vertical regulator
* Invisible screw (you have to disconnect, your eyes and solenoid from board, loosen the screws and pull trigger frame back, and it should be railed off)
* ACE (anti-chop break beam eye)
* Patented low rise clamp rapid feedneck
* Large trigger guard
Specifications:
* 250 psi operating pressure (much lower now)
* Uses N2 or compressed air for air source
* Air-ram electronic design
* Cocker compatible barrel thread
* Special Delrin Bolt
* Quick-strip bolt / striker system
* Sensor trigger with 2-step adjusting
* LED user interface (semi / ramping)
* BPS (cap at 20) sensor
* Break-beam sensor system
* Blade style trigger for lighter pull
* Low-rise feedneck
* 3-D machined body milling
* Dual regulator system
* RAPS ASA, Rapid Air Pressure System.
The Regulators on this marker are very innovative. It has a springless design, meaning no spring to wear, also no need to adjust each time of use since there is no spring pressure and release tension when air is off. It has 2 dip switches and it can be switch from ramping capped at 20 or 15 and semi capped at 20 or 15. It has an optical trigger so it has a very smooth pull. Its externally adjusted on the left side of the trigger frame, rather than on the trigger like common markers, its alot easier this way since you can actually walk the trigger while the allen key is attached to the side for adjustment. It comes with a 2 piece barrel, very accurate IMO. Like ive mention at the top it has ram mods and also a lightened valve spring and lightend ram spring for lower operating pressure.
It has no scratches, no wear. nothing, its flawless. I will including the stock parts that i took off (springs). Dont forget im probably the only fusion owner with modded springs, i didnt just cut the stock spring but put a different spring in. The only person that i can name that has the same ram mods i do is TheBigBoom.
VIDEOS:
http://www.darksidevideo.org/search/fusion/0.htm
NOT MINE, but will get some of mine soon. My fusion should shoot smoother and better than those on the video due to the RAM mods and poppit mod.
http://img362.imageshack.us/img362/5125/dscf0037ml3.jpg
http://img513.imageshack.us/img513/8457/dscf0036nw4.jpg
http://img513.imageshack.us/img513/8250/dscf0035of0.jpg
http://img159.imageshack.us/img159/1417/dscf0033ln4.jpg
Ram and Ram Cap. BTW the ram detaches from the ram cap, its not integrated together like impulses and bushmasters. Its pretty much like an intimidator ram and ram cap. Instead, the ram cap is integrated with the ram sleeve.
DECIDED NOT TO SELL, BUT ONLY TRADE. JUST OFFER.
Trades: All must be in NIB or LNIB condition.
05 Intimidators or 05'd
Alien Interceptors
Egos
PL Shockers (If not PL must have new board, trigger, and HE bolt)
FS8
DM4 + $
DM5
Practically anything but low-ends.
Just offer anything, BUT
Use your head.
Rules:
1. Feedback is in my signature, you ship first.
2. You can PM me, but post here first.
3. Lowballs are considered free ups. thanks
4. Dont act like leet hk cool dude from CA
5. Need parents approval? You talk to them, not me.
6. When you post it means you offered, meaning you cant say nvm.
7. I wont hold it for anyone unless its definite.
8. If you lead me on expect negative feedback
9. Dont like my prices? Deal with it. Go to file, exit. And sit in the corner and think about it.
10. Free ups are welcome.
11. Offer up!
http://img73.imageshack.us/img73/2599/gunwhorecopy0my.jpg
http://www.pbnation.com/showthread.php?t=1749465
http://img112.imageshack.us/img112/9250/pmgwc6ik4bb.jpg
I doubt ill let this go just for anything, just seeing what offers i can get. Ive done mods to the ram, added o-ring for smoother operation and better sound. (sounds like a matrix/spool) no more clank metal to metal sound, sounds like rubber hitting. I also put a lightened valve spring and ram spring. Trade value is more than sale value, this is LE. The current Fusions out are only Silver and Black colors and do not have the RAPS, i have the LE Armour Gray
I WILL REPEAT, THIS COLOR IS NOT MADE ANYMORE, ONLY ABOUT 30 IS MADE WITH THIS COLOR PROBABLY EVEN LESS SINCE THE FIRST PRODUCTION WERE 100 OF THEM. The newer production will only have DUST BLACK AND SILVER. ALSO wont have the RAPS. So this is WORTH ALOT MORE than the production ones. There ARE LESS than 30 in the WORLD.
Color: Armour Gray (LE color)
Features:
* Electronic LED switch
* Semi / Ramping
* 9V Battery
* N2 / Compressed air
* 250 pis low pressure air-ram
* Quick-release bolt
* Over-length 19.7-inch
* Autococker 14-inch two-piece barrel
* Weight 2.5 pounds
* Infrared rays sensor strike
* Vertical regulator
* Invisible screw (you have to disconnect, your eyes and solenoid from board, loosen the screws and pull trigger frame back, and it should be railed off)
* ACE (anti-chop break beam eye)
* Patented low rise clamp rapid feedneck
* Large trigger guard
Specifications:
* 250 psi operating pressure (much lower now)
* Uses N2 or compressed air for air source
* Air-ram electronic design
* Cocker compatible barrel thread
* Special Delrin Bolt
* Quick-strip bolt / striker system
* Sensor trigger with 2-step adjusting
* LED user interface (semi / ramping)
* BPS (cap at 20) sensor
* Break-beam sensor system
* Blade style trigger for lighter pull
* Low-rise feedneck
* 3-D machined body milling
* Dual regulator system
* RAPS ASA, Rapid Air Pressure System.
The Regulators on this marker are very innovative. It has a springless design, meaning no spring to wear, also no need to adjust each time of use since there is no spring pressure and release tension when air is off. It has 2 dip switches and it can be switch from ramping capped at 20 or 15 and semi capped at 20 or 15. It has an optical trigger so it has a very smooth pull. Its externally adjusted on the left side of the trigger frame, rather than on the trigger like common markers, its alot easier this way since you can actually walk the trigger while the allen key is attached to the side for adjustment. It comes with a 2 piece barrel, very accurate IMO. Like ive mention at the top it has ram mods and also a lightened valve spring and lightend ram spring for lower operating pressure.
It has no scratches, no wear. nothing, its flawless. I will including the stock parts that i took off (springs). Dont forget im probably the only fusion owner with modded springs, i didnt just cut the stock spring but put a different spring in. The only person that i can name that has the same ram mods i do is TheBigBoom.
VIDEOS:
http://www.darksidevideo.org/search/fusion/0.htm
NOT MINE, but will get some of mine soon. My fusion should shoot smoother and better than those on the video due to the RAM mods and poppit mod.
http://img362.imageshack.us/img362/5125/dscf0037ml3.jpg
http://img513.imageshack.us/img513/8457/dscf0036nw4.jpg
http://img513.imageshack.us/img513/8250/dscf0035of0.jpg
http://img159.imageshack.us/img159/1417/dscf0033ln4.jpg
Ram and Ram Cap. BTW the ram detaches from the ram cap, its not integrated together like impulses and bushmasters. Its pretty much like an intimidator ram and ram cap. Instead, the ram cap is integrated with the ram sleeve.
DECIDED NOT TO SELL, BUT ONLY TRADE. JUST OFFER.
Trades: All must be in NIB or LNIB condition.
05 Intimidators or 05'd
Alien Interceptors
Egos
PL Shockers (If not PL must have new board, trigger, and HE bolt)
FS8
DM4 + $
DM5
Practically anything but low-ends.
Just offer anything, BUT
Use your head.
Rules:
1. Feedback is in my signature, you ship first.
2. You can PM me, but post here first.
3. Lowballs are considered free ups. thanks
4. Dont act like leet hk cool dude from CA
5. Need parents approval? You talk to them, not me.
6. When you post it means you offered, meaning you cant say nvm.
7. I wont hold it for anyone unless its definite.
8. If you lead me on expect negative feedback
9. Dont like my prices? Deal with it. Go to file, exit. And sit in the corner and think about it.
10. Free ups are welcome.
11. Offer up!
http://img73.imageshack.us/img73/2599/gunwhorecopy0my.jpg